G-Rib / TR-36 / Classic Rib
Durability - Constructed of 29 gauge high tensile steel (to ASTM A792 Grade E, 80,000 minimum yield - 82,000 minimum tensile specifications), our ribbed panels are easy to install, sturdy, and weather tight. Resistance to dents, plus minimal expansion/contraction properties make this steel panel an excellent investment providing long lasting protection and greater durability that will enhance all types of structural designs.
Protection - First, each panel is coated with Galvalume, a patented aluminum-zinc alloy coating for extra protection. Panels are then bonderized and an epoxy primer is applied. For the final coat. A ceramic pigmented silicone polyester, supplies strength, hardness and durability against the effects of sun, wind, rain, heat and cold. It is extremely resistant to mildew. No blistering, peeling or flaking either!
Our custom cut lengths, to-the-inch up to 30 feet, reduce or eliminate end laps. You get a tighter, stronger, more attractive building.
The TSM 32 profile is an economical performer suitable for both roofing and wall cladding in agricultural, commercial and residential applications. This profile is recognized as the ideal choice for Quonsets. 29ga.
Installed vertically or horizontally, the Corrugated has resurfaced in the 1990's, on new architectural designs for commercial, institutional and industrial buildings.
Corrugated can be used as roofing or siding and is rollformed in lengths of up to 40 feet.
This panel is available in widths to offer more versatility and more possibilities for color and material choices. Available in 29 ga., 26 ga., and 24 ga.
Designed with strength as its main criteria. The Deckmate can be used for wall or roof applications in either new construction or renovation. Industrial and commercial buildings will look good for years, while being protected from the environment with this strong and handsome panel. The Deckmate offers superior strength and rigidity with its seven 1 ½" deep ribs and can be fastened to wood or metal structures. This product is roll-formed in panels covering 36" in width and custom-cut in lengths up to 40 feet for fast and easy installation. Available in 26 ga., and 24 ga.
Most suitable for commercial steel buildings, the AWR profile offers a modern, multi-ridged face that's ideal for low slope roofs. This profile has become a standard within the industry and is used for both roofs and wall cladding. Product offers great coverage of 36", which aids in faster construction and reduced cost in man hours. 26ga, 24ga.